Ⅰ、Purpose of equipment:

This testing machine is customized according to UL817 EIA-41 Standard "General Safety Requirements for Communication Cord and Power Cord" and uses advanced touch screen for writing. PLC control technology, combined with DC DC servo motor as the dynamic source, can accurately control the speed, frequency and angle. It is most suitable for Apple data line, relevant manufacturers and quality inspection departments to conduct EIA standard bending test on power line, DC line, cable and cable.

Ⅱ、Equipment characteristics:

1. The LCD touch human-machine interface is adopted, and the super-large interface is intuitive and generous.

2. The control part adopts Nissan PLC with reliable performance.

3. Use Nissan motor for service life and reliability.

4. Test times, speed automatic input adjustment.

5. Multi-station test, high efficiency. Touch screen can monitor each station's direct test.

Ⅲ、Main parameters:

1. Power supply: AC220V/50HZ；

2. Power: 500W；

3. Load: voltage ≦ 12V

4. Test speed: 5~60 times/min;

5. Bending angle: 2 ~ 360 (+180 ~ 180) adjustable;

6. Angular accuracy：≦±1℃

7. Test station: controlled by two sets of motor systems, each set of motors tests 3 stations simultaneously, each station counts separately, and all stations stop after disconnection;

8. Load: 50,100,200,300,500 g each six

9. Guard plate: a guard plate is installed at the upper end of the signal interface to prevent the normal code from hitting the binding post when falling off.

10. The position of the guide plate can be adjusted up and down (the distance is 1-300 mm)

11. Metallurgical tool r angle: 12.4 12.7 25.4 length 90mm quantity each six

12. Bending times: 0~999999 can be preset;

13. Overall size: length (1500px)X width (3000px)X height (3375px)

14. Weight (about): 95kg